MODUXO
UniFi Flex Mini in the white holder, with the five network ports facing forward

Wall mount for the UniFi Flex Mini

Your 5-port switch on the wall instead of loose behind a cabinet.

A mount that holds the UniFi Flex Mini firmly, upright or flat. Ports and status lights stay visible.

€5.95

incl. VAT

Item number MX-ITN-0005

Made to order

We make this in the Netherlands after you order. Allow 2 working days, then it goes in the post.

  • 14-day right of withdrawal on standard products
  • Secure payment with credit card, iDEAL, Wero, Bancontact or Klarna

Why this product

  • The switch is held firmly and no longer hangs from its own cables
  • Mount it upright or flat, whichever fits
  • Ports accessible and status lights visible
  • No more strain on the network connections
  • Two screw holes, so it does not twist

Description

The UniFi Flex Mini is so small that it never stays put. It slides behind the cabinet, it hangs from its own network cables, and the first tug on a cable puts it on the floor. In this holder it stays in place.

The switch clips into the holder and you screw the holder to the wall — upright or flat, whichever suits your spot. The ports stay accessible and the status lights stay visible, so you do not have to take it out to see whether something is wrong.

Why that matters

A switch hanging from its cables pulls on the connectors all the time. That is exactly where the little latches snap off and where a connection starts dropping out now and then after a year. If the device is fixed in place, its weight no longer hangs from the connections.

Specifications

Suitable for Ubiquiti UniFi Flex Mini, 5-port switch
Mounting Two screws; upright or flat
Colour White
Included The holder. Switch and screws not included
Production Made to order in the Netherlands

Compatible with

Made for the Ubiquiti UniFi Flex Mini. MODUXO is not an official partner of Ubiquiti.

The brands and devices mentioned belong to their own manufacturers. MODUXO is not an official partner of those brands; "compatible with" means this product fits the device named, nothing more.

Mounting

Hold the holder against the wall, level it and mark the two holes. In masonry, drill 6 mm and use a nylon wall plug; in plasterboard, use a cavity wall plug; in wood, pre-drill with a 2.5 mm bit. Then click the switch in and let the network cables form a loop, so there is no strain on the connectors.

Product safety

  • Made of PLA. PLA softens from about 55 °C: do not mount it right next to a heat source, in full sun behind glass or in a car.
  • Mount it with screws and plugs that suit your wall, and check that everything is secure afterwards. Only load the holder with the device it was made for.
  • Keep the ventilation openings of the device in the holder clear.
  • Not a toy. Keep small parts, such as screws and clips, out of reach of young children.
  • If you notice a crack or deformation, stop using the holder and contact us.

Manufacturer: Decit Automatisering B.V., trading as MODUXO, Ohmweg 65, 2952 BB Alblasserdam, Netherlands. Email: info@moduxo.nl.

Product identification: Wall mount for the UniFi Flex Mini, item number MX-ITN-0005.

Frequently asked questions

Does the power adapter fit in it too?
No, this holder is for the switch itself. The Flex Mini is powered via USB-C or via PoE on the first port; a separate adapter is tidied away on its own.
Can it go both flat and upright?
Both. Turn the holder a quarter turn and screw it on that way; the switch clips in equally well in either position.
Do the lights stay visible?
Yes. The front with the ports and the status LEDs stays clear, so you can see what is going on without taking anything apart.

Write a review

Do you own this product? Tell us briefly what you think of it. We publish it once we have read it.

Rating

Recently viewed